Crossover Components
Audio Note RES-NM30-1W-330R | 330 Ω | 1 W | 1%
Audio Note RES-NM30-1W-390R | 390 Ω | 1 W | 1%
Jantzen Audio 002-0772 | 3.9 Ω | 10 W | 5% | Ceramic Resistor
Mundorf P100-1,8 | 1.8 mH | 0.13 Ω | 3% | 18 AWG | MCoil Ferrite PipeCore Crossover Coil
Intertechnik CO30/033/090 | 0.33 mH | 0.18 Ω | 5% | 19 AWG
Mundorf ECAP100-100 | 100 µF | 5% | 100 V | Bipolar Electrolytic Capacitor
Audio Note CAP-3130 | 0.0022 µF | 10% | 630 V
Audio Note CAP-3140 | 0.0028 µF | 10% | 630 V
Audio Note RES-NM30-1W-470R | 470 Ω | 1 W | 1%
Jantzen Audio 002-0769 | 3.6 Ω | 10 W | 5% | Ceramic Resistor
Audio Note RES-NM30-1W-560R | 560 Ω | 1 W | 1%
Audio Note CAP-3150 | 0.0047 µF | 10% | 630 V
Audyn Q2/5.6/250 | 5.6 µF | 5% | 250 V | Q2 Capacitor
Audio Note CAP-3160 | 0.0082 µF | 10% | 630 V
Audio Note RES-NM30-1W-680R | 680 Ω | 1 W | 1%
Jantzen Audio 002-0763 | 3.0 Ω | 10 W | 5% | Ceramic Resistor
Audio Note RES-NM30-1W-820R | 820 Ω | 1 W | 1%
Jantzen Audio 002-0760 | 2.7 Ω | 10 W | 5% | Ceramic Resistor
Mundorf P50-18 | 18 mH | 5.77 Ω | 3% | 24 AWG | Iron-core Coil
Mundorf MESGO-3.9T3.450 | 3.9 µF | 3% | 450 V | MCap EVO SilverGold Oil Capacitor
Audio Note RES-NM35-1W-1K0 | 1 kΩ | 1 W | 1%
Audio Note RES-NM35-1W-1K2 | 1.2 kΩ | 1 W | 1%
Jantzen Audio 002-0748 | 1.8 Ω | 10 W | 5% | Ceramic Resistor
Jantzen Audio 000-L-0030 | 0.30 mH | 0.17 Ω | 3% | 15 AWG | Litz Coil
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























