Crossover Components
Jantzen Audio 002-0301 | 3.0 Ω | 5 W | 5% | MOX Resistor
Intertechnik LU44/1.20/071 | 1.2 mH | 1.04 Ω | 3% | 21 AWG
Intertechnik TRI55/022/0.50 | 0.22 mH | 0.147 Ω | 1% | 24 AWG
Mundorf MESGO-5.6T3.450 | 5.6 µF | 3% | 450 V | MCap EVO SilverGold Oil Capacitor
Jantzen Audio 002-0298 | 2.7 Ω | 5 W | 5% | MOX Resistor
Jantzen Audio 002-0292 | 2.2 Ω | 5 W | 5% | MOX Resistor
Intertechnik CO55/220/060 | 22 mH | 4.26 Ω | 5% | 23 AWG
Mundorf SESG-0.47T2.1000 | 0.47 µF | 2% | 1000 V | MCap SUPREME EVO SilverGold Oil Capacitor
Jantzen Audio 002-0289 | 2.0 Ω | 5 W | 5% | MOX Resistor
Jantzen Audio 002-0286 | 1.8 Ω | 5 W | 5% | MOX Resistor
ClarityCap PUR18uH250Vdc | 18 µF | 3% | 250 V
Jantzen Audio 002-0280 | 1.5 Ω | 5 W | 5% | MOX Resistor
Jantzen Audio 002-0274 | 1.2 Ω | 5 W | 5% | MOX Resistor
Audio Note CAP-100-R-100U-350V | 100 µF | 20% | 350 V
Jantzen Audio 002-0268 | 1.0 Ω | 5 W | 5% | MOX Resistor
Mundorf ME-56T3.350 | 56 µF | 3% | 350 V | MCap EVO Capacitor
Mundorf MEO-56T3.350 | 56 µF | 3% | 350 V | Oil
Intertechnik MKTR/3.3/100 | 3.3 µF | 5% | 100 V
Read more: Crossover Components
A passive crossover decides which driver gets which part of the spectrum, and where and how steeply the bands hand over to each other. At least half of a well-designed speaker's sound is shaped here, not in the drivers themselves.
This section holds everything a crossover is built from: inductors, capacitors, resistors, circuit boards, driver protectors and ready-assembled networks. When refurbishing, start with aged electrolytic capacitors; for a new design, start by measuring the values precisely.























